Author Topic: AutoCAD Chinese tutorial ( in )  (Read 165 times)

myyclsw

  • Hero Member
  • *****
  • Posts: 1896
    • View Profile
    • yuancailiao
AutoCAD Chinese tutorial ( in )
« on: April 11, 2013, 08:36:28 pm »

Q: Why can not display Chinese characters? Or input Chinese characters into a question mark?
A: The reason may be:
1. Corresponding font does not use the Chinese character fonts. HZTXT.SHX;
Current system is not the kanji font shape file; should be used in the form of documents copied to the the AutoCAD font directory (usually ... \ FONTS \);
For certain symbols such as the Greek alphabet. Similarly must use the corresponding font shape file. Otherwise it will appear as? Number.
Q: How do I solve the problem of to appear garbled characters in open R12 files in R14?
A: R14 open R12 files correctly select a Chinese character font file or garbled characters is the code page DWGPAGECODE R14 and R12 used different reason. To AutoDesk's home page to download the code page conversion tool wnewcp. Run wnewcpAfter First "R11/R12" check box is selected and then click the "Browse" button to select the file or directory you want to convert and then select the new code page (ANSI)., Click "StartConversion "to start the conversion. Conversion in R14 will be able to display Chinese characters correctly.
The the Tengen provided code conversion tool DWGCODE.EXE similarly may be transcoded.
If you do not have these tools. R12 environment open to convert graphics files. Input COMMAND state DWGCODEPAGE save the file to modify its value ASCII.
Bulk editing can use the the SCR command group file or LISP programming.
Q: Why input text height can not be changed?
A: The font height value is not 0. DTEXT command writing text and when prompted for the height. Wrote the text height is unchanged. Use the font dimension.
Q: How do I change the font format already exists?
A: If you want to change the size of the existing text fonts. Aspect ratio. Spacing. Tilt angle. Insertion point best use "characteristics (DDMODIFY)" command (provided you have defined many text format). Click "features" command click the text that you want to modify. carriage return. modify the text window. modifications can select the item you want to modify.
Q: Can I use the system font such as Times New Roman. Italics?
A: ACADR14 able to use the *. TTF Chinese character font file., But the font is too spend CPU time.) Is much too slow for a slightly lower grade computer display speed (such as the use of real-time zoom command recommended low-grade computer or use *. shx file in Chinese characters *. shx file which recommended the the Daheng or HaoChen matching ACADR12 HZ * shx font file but no corresponding font will cause the display of Chinese characters on different machines. course is beautiful sake of a small amount of use the system font is also not a bad idea.Menu
Q: Why is the toolbar button icons some smiley replaced?
A: when AutoCAD can not find the the button bitmap file path. These button icons in the tool bar or tool box will be a smiling face instead of which may occur after the toolbar is customizable menu template file (MNU) by manual editing.
This case you can use a text editor to open the menu source files (MNS) and the menu template file (MNU). Copied from the MNS file user tool bar section. Paste the MNU file. Then renamed or deleted the old MNS. MNC and MNR file. then MENU / MENULOAD command Loading MNU file AutoCAD will be re-compiled menu file. to generate new MNS.MNC and MNR files. This will solve the problem.
If bitmap file is not in the AutoCAD support path on this issue will appear. Belief in "Preferences (System Configuration) dialog box support includes the bitmap file directory path, for example. when you move from a customized toolbar a button to AutoCAD standard menu in a toolbar you must edit this button in order to save the bitmap file path is support to do according to the following steps:
1. After moved or copied to a different icon in the menu bar. Maintain Toolbar dialog is still open, right-click the icon to edit it.
2. Button Properties dialog box, select "edit" button.
3. In the Button Editor dialog box, select Save as button. Bitmap file directory specified in the AutoCAD support path.
4. Close the the buttons editor. Then in the Button Properties dialog box, select Apply (Application) button. The final closure AutoCAD. Restart it.
Q: How Chinese menu?
A: in WIN95/98. Editor such as WordPad will support directory acad.mnu file. [English command name changed to Chinese save and exit. Input "menu" command in R14. acad.mnu menu file loaded drop-down menu to become Chinese.
If the Chinese menu files can be used directly.Printing
Q: PLOT and ASE command only on the command line when prompted. While no pop-up dialog box Why?
A: AutoCAD system the variable CMDDIA used to control PLOT command and ASE commands dialog displays. Set CMDDIA for the 1. Problem can be solved.
Q: Print out the diagram effect is very poor. Grayscale differences lines, and why?
A: this case most of the configuration of the printer or plotter driver. Operating system. Usually from the following considerations can solve the problem.
1. Configure the printer or plotter error jitter switch is closed;
2. The correct printer or plotter driver. Need to upgrade;
3. If AutoCAD is configured as a system printer output. To change the ADI driver reconfigure AutoCAD printers use AutoCAD for all kinds of printers and plotters;
4. Different types of printer or plotter. AutoCAD provides the command can be further detailed configuration.
Such as plotters support the HPGL / 2 language series. Use the command "hpconfig";
5. In AutoCADSet pen numbers in the Plot dialog box. Correspondence between color and line and the pen width; same pen number specified for different colors (preferably the same as 1) but this sum of numbers corresponding to the linear and pen width can Some inkjet printers can only support 1-16 pen No. If the pen number is too large, can not be printed;
6. Pen width settings too. Example, greater than 1;
7. The operating system is Windows NT. The NT patch package may need to update (Service Pack).
Q: install R14. MS WORD what fonts are not, how is it?
A: MS WORD font reason with AutoCAD R14 system installation called PhantomOLE / ADI virtual printer related. Phantom AutoCADOLE / ADI virtual printer makes R14 new ADI driver. Printed or plotted raster graphics. R14 typical installation does not include this option only in full or custom installation will produce this virtual printer. Sometimes It will also be set as the default system printer without doing any prompts.
According to the Microsoft Office software "WYSIWYG" principle MSWORD document fonts used. System default printer related That screen display fonts should be printed with the printer font is the same as or similar to Windows will first printer print font to find a suitable screen display font if no match is found the font or printer driver does not provide information of screen fonts.Windows will select the closest printer font screen font if the Phantom AutoCADOLE / ADI virtual printer as the default system printer. MS WORD fonts are only two: morden and plotter.
In the Windows system. Specify the correct system printer as the default printer. MSWORD fonts can be restored to normal. System does not have any other printer. Should be in the printer settings. Configure a Windows system printer can even if it is a "logical" printer.
One thing to bear in mind can not be modified Phantom AutoCADOLE / ADI virtual printer attributes more can not arbitrarily delete it otherwise will affect the output of raster graphics and OLE objects even cause system crashes.
Q: Can I batch print?
A: Method 1: Graphical output first to the PLT file under DOS batch file, batch print PLT files in the specified directory.
Method:R14 specialized external function. Multiple graphics files, depending on the print configuration file. Outputs to one or more of the printer or plotter. Achieve batch plot more flexible this in two ways. opportunities for error. higher the efficiency. in AutoCAD program group select BatchPlot Utility can.
Q: pasted into AutoCAD drawing in a Word document. Printed lines are too thin. How to do?
A: AutoCAD graphics clip to MSWord document looks like everything is relatively smooth, but when to print out the document. AutoCAD drawing lines become very fine. Really bad effect. Provide us with the solution to the user as follows:
1. In AutoCAD using the PostScript print driver. Configure a PostScript printer.
2. If the background color of AutoCAD and MSWord of a different background color. R14 default background color is black. Then first change the background color of AutoCAD., The same color as the background of MS Word.
3. Running PLOT command. Selected graph to a file specified in the brushes dialog box, set the width of the pen.
4. Start a new plan. PSIN command input. Eps file.
5. Then put the graphics clip to MS Word
Another method can lines in AutoCAD will convert the PLINE line. Set good width and then copy paste to WORD.
Q: Why do some graphics can display but do not print out?
A: If the graphics rendering in AutoCAD automatically generated Layers (DEFPOINTS.ASHADE, etc.). Would happen. Draw entity should be avoided in these layers.
The AutoCAD2004 command alias shortcuts Daquan
Abstract: 3DARRAY: to create a three-dimensional array 3A 3DFACE: to create a three-dimensional surface 3F3DORBIT: control interactive view objects in three-dimensional space ...
Keywords: CAD Drawing
3DO 3DPOLY: used in three-dimensional space "Continuous" linetype create straight segments polyline of 3P ADCENTER: Manage Content ADCALIGN: an object in two-dimensional and three-dimensional space will be aligned with other objects AL APPLOAD: load or unload the application and specify startup to load the application APARC: create an arc A the AREA: calculate the area of ​​the object or the designated area and perimeter AA ARRAY: create multiple copies of objects arranged in a prescribed manner, ARATTDEF: create properties define ATT ATTEDIT: change attribute information ATE ATTEXT: extract attribute data DDATTEXTThe BHATCH: using a pattern fill enclosed area or to selected objects H.BH BLOCK: create a block definition B according to the selected objectBOUNDARY: BR BO BREAK: part of the deleted object or the object is decomposed into two parts to create regions or polyline from an enclosed areaCHAMFER: to the edge of the object plus chamfer CHA CHANGE: modify the characteristics of the existing object-CH CIRCLE: create a circle CCOLOR: colors COL COPY define a new object: the copied object CO.CP DBCONNECT: external database tables AutoCAD interfaceAAD.AEX.ALI.ASQ.ARO.ASE.DBC DDEDIT: edit text and attribute definitions the ED DDVPOINT: set of three-dimensional observation directionVP DIMALIGNED: Create aligned linear dimensions DAL DIMANGULAR: Create the angle marked DANCreate linear DIMBASELINE: on a selected label baseline at angle or coordinate label DBAs DIMCENTER: create circles and arcs center mark or centerlineThe DCE DIMCONTINUE: created from the previous or selected marked the second size boundaries at the linear angle or coordinate label DCODIMDIAMETER: diameter of circles and arcs create to label DDI DIMEDIT: edit label DED DIMLINEAR: create linear dimensions marked DLIDIMORDINATE: create coordinate points marked the DOR DIMOVERRIDE: alternative labeling system variables DOVDIMRADIUS: create a circle and the radius of the arc label DRA DIMSTYLE: to create or modify a dimension style D DIMTEDIT: move and rotate dimension textDIMTED DIST: DI DIVIDE: measuring the distance between the two points and the angle will point objects or blocks along the length or perimeter of the object arranged at equal intervals DIVDONUT: draw a filled circle, and ring DO DRAWORDER: modify the image and the other objects in the display order of DRDSETTINGS: Specify the capture mode. Raster polar and object snap tracking settings DS.RM.SE DSVIEWER: "bird's-eye view" window opens AVDVIEW: the defined parallel projection or perspective views DV ELLIPSE: create oval or elliptical arc EL ERASE: delete objects from the graph EEXPLODE: decomposition of the composite object to object components X EXPORT: EXTEND to other file formats, save the object EXP: extended object to another object EXEXTRUDE: to stretch existing two-dimensional object to create a three-dimensional prototype EXT FILLET: to the object while adding rounded corners FFILTER: create a reusable filter for features selected object FI GROUP: create an object named selection set GHATCH: pattern fills a specified boundary region-H HATCHEDIT: modify existing hatch object HEHIDE: re-generated three-dimensional model does not show hidden lines HI IMAGE: management the image IM IMAGEADJUST: control the brightness of the image is selected contrast and FadeThe IAD IMAGEATTACH: attached to the current drawing new image object the IAT IMAGECLIP: as an image object to create a new clipping boundary ICLIMPORT: the AutoCAD input file IMP the INSERT: to be named block or graphics inserted into the current drawing IINTERFERE: INF create a three-dimensional composite entity with two or more of the common parts of the three-dimensional solidINTERSECT: created by the intersection of two or more entities or surface domain composite entity or surface domain, and delete IN INSERTOBJ outside the intersection: insert links or embedded objectIO LAYER: management layers and layer properties LA-LAYOUT: create a new layout. Rename the copy to save or delete the existing layout LOLEADER: Create a lead connected to the Notes with a geometric features LEAD LENGTHEN: elongated object LEN LINE: create line segments LLINETYPE: create load and set of linear LT LIST: the display the database information LI.LS selected object the LTSCALE: set linetype scale factor LTSLWEIGHT: LW MATCHPROP: Sets the current lineweight. The linewidth display options, and lineweight units MA MEASURE: point objects or blocks are placed at specified intervalsME MIRROR: mirror copy MI MLINE create objects: create multiple parallel lines ML the MOVE: M moving objects by a specified distance in the specified directionMSPACE: cut from paper space to model space viewport MS MTEXT: create a multi-line text T.MT MVIEW: create a floating viewport and open an existing floating viewports MVOFFSET: Creates concentric circles. Parallel lines, and parallel curves O OPTIONS: custom AutoCAD settings GR.OP.PROSNAP: Setting the Object Snap mode OS PAN: move the current the viewport display graphics P PASTESPEC of: insert the clipboard data and control data formats PAPEDIT: editing polylines and three-dimensional polygon mesh PE PLINE: create 2D polylines PL the PRINT: graphic print to the print device or file PLOTPOINT: Create a point object PO POLYGON: create closure equilateral polyline POL PREVIEW: print graphics effects PREPROPERTIES: control the properties of existing objects CH.MO PROPERTIESCLOSE: Close the Properties window PRCLOSEPSPACE: switch from model space viewport to paper space PS the PURGE: delete the the graphical database does not use named objects such as blocks or layers PUQLEADER: Quick comment LE the QUIT: create leads and lead exit AutoCAD EXIT to RECTANG is: draw a rectangle polyline RECREDRAW: Refresh to display the current viewport R REDRAWALL: refresh display viewport RA REGEN: re-generated graphics and refresh to display the current viewport REREGENALL: re-generated graphics and refresh all viewports REA the REGION: select from existing objects set to create a the surface domain objects REG RENAME: Modify the object nameREN RENDER: to create a three-dimensional wireframe or solid model with realistic rendered image RR REVOLVE: rotation about an axis of two-dimensional objects to create entities REVRPREF: Set the rendering system configuration RPR the ROTATE: winding basis points the moving objects RO SCALE: XY and Z direction proportion to enlarge or shrink the objectSC SCRIPT: script file to execute a series of commands SCR SECTION: SEC created using cutting planes and entities intersecting surface domainSETVAR: List of system variables and modify variable values ​​SET SLICE: a group of entities SL SNAP: flat-cut provisions move the cursor at specified intervals SNSOLID: create two-dimensional filled polygons SO SPELL: Check the graphic text spelling SP SPLINE: Create a quadratic or cubic spline (NURBS) curveFor SPL SPLINEDIT: edit spline object SPE STRETCH: move or stretch objects SSTYLE: create or modify a named text style and set the graphics in text style ST SUBTRACT: with the difference set to create a combination of surface the domain or entities SUTABLET: calibration configuration. Opens and closes installed digitizer TA THICKNESS: set the thickness of the current three-dimensional entities THTILEMODE: "Model" tab or the last layout tab current of TI.TM TOLERANCE: to create a geometric tolerance annotation TOLTOOLBAR: Show hide and since the custom toolbar TO TORUS: to create annular entity TOR TRIM: trimmed with the cutting edge of other objects defined object TRUNION: through arithmetic and create a combined surface domain or entity UNI UNITS: Set coordinate and angle display formats and precision UN VIEW: save and restore the view namedThe V VPOINT: the set graphic three-dimensional visual map view direction-VP WBLOCK: Write the block object to the new graphic file WWEDGE: to create a three-dimensional entity its inclined plane the tip along X shaft forward WE XATTACH of: external reference attached to the current drawing XAThe XBIND: external reference dependence symbol bound to a graph XB XCLIP: Define external reference or block clipping boundary and set the cut surface before and after the cut surface XCXLINE: create an infinite straight line (reference line) XL XREF: control the graphics in external reference XRZOOM: Enlarge or shrink the apparent size of objects of the current viewport.
AutoCAD drawing skills
Abstract: 3DARRAY: to create a three-dimensional array 3A 3DFACE: to create a three-dimensional surface 3F3DORBIT: control interactive view objects in three-dimensional space ...
Keywords: CAD Drawing
3DO 3DPOLY: used in three-dimensional space "Continuous" linetype create straight segments polyline of 3P ADCENTER: Manage Content ADCALIGN: an object in two-dimensional and three-dimensional space will be aligned with other objects AL APPLOAD: load or unload the application and specify startup to load the application APARC: create an arc A the AREA: calculate the area of ​​the object or the designated area and perimeter AA ARRAY: create multiple copies of objects arranged in a prescribed manner, ARATTDEF: create properties define ATT ATTEDIT: change attribute information ATE ATTEXT: extract attribute data DDATTEXTThe BHATCH: using a pattern fill enclosed area or to selected objects H.BH BLOCK: create a block definition B according to the selected objectBOUNDARY: BR BO BREAK: part of the deleted object or the object is decomposed into two parts to create regions or polyline from an enclosed areaCHAMFER: to the edge of the object plus chamfer CHA CHANGE: modify the characteristics of the existing object-CH CIRCLE: create a circle CCOLOR: colors COL COPY define a new object: the copied object CO.CP DBCONNECT: external database tables AutoCAD interfaceAAD.AEX.ALI.ASQ.ARO.ASE.DBC DDEDIT: edit text and attribute definitions the ED DDVPOINT: set of three-dimensional observation directionVP DIMALIGNED: Create aligned linear dimensions DAL DIMANGULAR: Create the angle marked DANCreate linear DIMBASELINE: on a selected label baseline at angle or coordinate label DBAs DIMCENTER: create circles and arcs center mark or centerlineThe DCE DIMCONTINUE: created from the previous or selected marked the second size boundaries at the linear angle or coordinate label DCODIMDIAMETER: diameter of circles and arcs create to label DDI DIMEDIT: edit label DED DIMLINEAR: create linear dimensions marked DLIDIMORDINATE: create coordinate points marked the DOR DIMOVERRIDE: alternative labeling system variables DOVDIMRADIUS: create a circle and the radius of the arc label DRA DIMSTYLE: to create or modify a dimension style D DIMTEDIT: move and rotate dimension textDIMTED DIST: DI DIVIDE: measuring the distance between the two points and the angle will point objects or blocks along the length or perimeter of the object arranged at equal intervals DIVDONUT: draw a filled circle, and ring DO DRAWORDER: modify the image and the other objects in the display order of DRDSETTINGS: Specify the capture mode. Raster polar and object snap tracking settings DS.RM.SE DSVIEWER: "bird's-eye view" window opens AVDVIEW: the defined parallel projection or perspective views DV ELLIPSE: create oval or elliptical arc EL ERASE: delete objects from the graph EEXPLODE: decomposition of the composite object to object components X EXPORT: EXTEND to other file formats, save the object EXP: extended object to another object EXEXTRUDE: to stretch existing two-dimensional object to create a three-dimensional prototype EXT FILLET: to the object while adding rounded corners FFILTER: create a reusable filter for features selected object FI GROUP: create an object named selection set GHATCH: pattern fills a specified boundary region-H HATCHEDIT: modify existing hatch object HEHIDE: re-generated three-dimensional model does not show hidden lines HI IMAGE: management the image IM IMAGEADJUST: control the brightness of the image is selected contrast and FadeThe IAD IMAGEATTACH: attached to the current drawing new image object the IAT IMAGECLIP: as an image object to create a new clipping boundary ICLIMPORT: the AutoCAD input file IMP the INSERT: to be named block or graphics inserted into the current drawing IINTERFERE: INF create a three-dimensional composite entity with two or more of the common parts of the three-dimensional solidINTERSECT: created by the intersection of two or more entities or surface domain composite entity or surface domain, and delete IN INSERTOBJ outside the intersection: insert links or embedded objectIO LAYER: management layers and layer properties LA-LAYOUT: create a new layout. Rename the copy to save or delete the existing layout LOLEADER: Create a lead connected to the Notes with a geometric features LEAD LENGTHEN: elongated object LEN LINE: create line segments LLINETYPE: create load and set of linear LT LIST: the display the database information LI.LS selected object the LTSCALE: set linetype scale factor LTSLWEIGHT: LW MATCHPROP: Sets the current lineweight. The linewidth display options, and lineweight units MA MEASURE: point objects or blocks are placed at specified intervalsME MIRROR: mirror copy MI MLINE create objects: create multiple parallel lines ML the MOVE: M moving objects by a specified distance in the specified directionMSPACE: cut from paper space to model space viewport MS MTEXT: create a multi-line text T.MT MVIEW: create a floating viewport and open an existing floating viewports MVOFFSET: Creates concentric circles. Parallel lines, and parallel curves O OPTIONS: custom AutoCAD settings GR.OP.PROSNAP: Setting the Object Snap mode OS PAN: move the current the viewport display graphics P PASTESPEC of: insert the clipboard data and control data formats PAPEDIT: editing polylines and three-dimensional polygon mesh PE PLINE: create 2D polylines PL the PRINT: graphic print to the print device or file PLOTPOINT: Create a point object PO POLYGON: create closure equilateral polyline POL PREVIEW: print graphics effects PREPROPERTIES: control the properties of existing objects CH.MO PROPERTIESCLOSE: Close the Properties window PRCLOSEPSPACE: switch from model space viewport to paper space PS the PURGE: delete the the graphical database does not use named objects such as blocks or layers PUQLEADER: Quick comment LE the QUIT: create leads and lead exit AutoCAD EXIT to RECTANG is: draw a rectangle polyline RECREDRAW: Refresh to display the current viewport R REDRAWALL: refresh display viewport RA REGEN: re-generated graphics and refresh to display the current viewport REREGENALL: re-generated graphics and refresh all viewports REA the REGION: select from existing objects set to create a the surface domain objects REG RENAME: Modify the object nameREN RENDER: to create a three-dimensional wireframe or solid model with realistic rendered image RR REVOLVE: rotation about an axis of two-dimensional objects to create entities REVRPREF: Set the rendering system configuration RPR the ROTATE: winding basis points the moving objects RO SCALE: XY and Z direction proportion to enlarge or shrink the objectSC SCRIPT: script file to execute a series of commands SCR SECTION: SEC created using cutting planes and entities intersecting surface domainSETVAR: List of system variables and modify variable values ​​SET SLICE: a group of entities SL SNAP: flat-cut provisions move the cursor at specified intervals SNSOLID: create two-dimensional filled polygons SO SPELL: Check the graphic text spelling SP SPLINE: Create a quadratic or cubic spline (NURBS) curveFor SPL SPLINEDIT: edit spline object SPE STRETCH: move or stretch objects SSTYLE: create or modify a named text style and set the graphics in text style ST SUBTRACT: with the difference set to create a combination of surface the domain or entities SUTABLET: calibration configuration. Opens and closes installed digitizer TA THICKNESS: set the thickness of the current three-dimensional entities THTILEMODE: "Model" tab or the last layout tab current of TI.TM TOLERANCE: to create a geometric tolerance annotation TOLTOOLBAR: Show hide and since the custom toolbar TO TORUS: to create annular entity TOR TRIM: trimmed with the cutting edge of other objects defined object TRUNION: through arithmetic and create a combined surface domain or entity UNI UNITS: Set coordinate and angle display formats and precision UN VIEW: save and restore the view namedThe V VPOINT: the set graphic three-dimensional visual map view direction-VP WBLOCK: Write the block object to the new graphic file WWEDGE: to create a three-dimensional entity its inclined plane the tip along X shaft forward WE XATTACH of: external reference attached to the current drawing XAThe XBIND: external reference dependence symbol bound to a graph XB XCLIP: Define external reference or block clipping boundary and set the cut surface before and after the cut surface XCXLINE: create an infinite straight line (reference line) XL XREF: control the graphics in external reference XRZOOM: Enlarge or shrink the apparent size of objects of the current viewport.
A lot of CAD tips
Summary: CAD tips lot
Keywords: CAD Drawing
1.Executive Editor command prompt to select the target. Rectangle select and drag the cursor from left to right window Windows if the right-to-left drag the cursor. Compared with crossCross "way.
Relative coordinate input points in the orthogonal state general input: _AT_ x 0 or @ 0, y(For example, the input relative coordinates "@ 100,0 next point relative increase of 100 on the little X direction and if the input
Relative coordinates "@ 0,50" said the next point relatively little increase in the Y direction 50). Both cases can be directly input 100 or 50, you can achieve the same purpose. Thus saving input time.
Sometimes cross-point mark at a mouse click in AutoCAD. BLIPMODE command prompt line input OFF eliminate it.
4.Some users may find the use of AutoCAD command prompt dialog box will become the line. The Print command control it is a system variable CMDDIA. Turn it off line.
5.The ellipse command generates oval in polyline entity or oval by system variables PELLIPSE decided when it is 1. Generate the ellipse is PLINE.
6. CMDECHO variable determines the command line echo is generated in the program execution should be set to 0.
7. DIMSCALE determine the proportion of the dimension. Whose value is an integer. Default is 1. Graphics have a certain scaling should be better to change the scaling.
Higher version for CAD provides shape and position tolerancing. Round the circle roundness and concentricity enough. Fact. AutoCAD common symbol definition in AutoCAD installation directory SUPPORT sub-righteousness a circular shape. round arc of 127 °. actually but not very good correction of 90 ° (eg, changed more ugly).
9. Hollow of Chinese characters such as the use of AutoCADBONUS function (R14, must be fully installed AutoCAD. Chose custom installation). To a TXTEXP command. Fried text
10. AutoCADR14 is BONUS in a ARCTEXT of command. The arc text output. Use for the first election of the arc and then enter the text content and press OK.
11. BONUS a useful command. Namely MPEDIT. Modify polylines together it will be more than one line, and then change its line width.
12.Image command in R14 instead the command of the R13 in BMPIN.PCXIN like. It will bitmaps embedded files only used to display as blasted became empty frame. How to use PCXIN such as commands to reproduce? Please the R13 installation directory the under RASTERIN.EXE copyed R14. Use appload loaded into bitmap then you can import (editing. Exploded).
13.The BREAK command used to interrupt the entity user can also be a little disconnected entities. Use is in the selection of the first point. Enter "@" commonly used in a line for some point crossed another section of the solid lines.
14. AutoCADR14 provide a lot of command abbreviations. Many of the R13 in the abbreviation of the command with the abbreviation following CAD in the single-character abbreviations: A: ARC.B: Bmake.C: Circle.D: ddim.E: erase. F: fillet.G: group.H: bhatch.I: ddinsert.L: line.M: move.O: offset.P: pan.R: redraw.S: stretch.T: mext.U: undo.V: ddview.W: Wblock.X; explode.Z: zoo. heavy use. faster than the click of the mouse to take (especially in the ls output speed of five characters) will be found. AutoCADR14 has considerably expanded the simplified command not only simplified the first letter of the command (not listed). Simplified command using the first two letters of often, such as: array. Copy. Dist. Donut. Dtext. Filter. Mirror. Pline. Rotate. Trim.scale. snap. style. units more to improve the speed of the input commands using the keyboard. familiar with the key
Friends of the disk is simply a menace.
15. AutoCAD R14 an abbreviation of the command can also be used by the AutoCAD R13.The the Support subdirectory under R14 ACAD.pgp copy to a the Support subdirectory under AutoCAD R13.
16. AutoCADIn ACAD.pgp file is very important. Records command abbreviation content. Users can customize them to the following format: <command abbreviation>* Command name can also define the system command. AutoCAD R14 sh command executable DOS command, but little in Windows under.
17. AutoCADCommand of the R14 with NOTEPAD.EDIT.DIR.DEL system. NOTEPAD custom CAD uses. Use screen flash (in DOS). Returned very unpleasant people I believe that let us to compile a small program. named note.lsp:
(Defun c: notepad ()
(Startapp "notepad")
NOTEPAD the first ACAD.pgp command to delete the definition line. Reentrant CAD. Commands this program: (load "note") loaded the next with NOTEPAD command have better results. The best (load " note ") joined the the Support subdirectory under ACADR14.lsp.
18. AutoCADR14 in the print line width by color settings. Various linear so that the mechanical drawing the .. the linewidth different lines can be placed in different layers. Layer defines a linear color print settings set fixed linear relationship of color to good effect.
19. AutoCADThe R14 Support in ACAD.dwt, as a default template to take processing it. Commonly layer. Blocks. Annotation type defined plus standard frame can save a lot of duplication of work.
20.Many Lisp external command file in AutoCAD can be directly observed. Learning to develop Lisp application NOTE; AUTOCAD R14, but the final version of Lisp public the contents of the file. CAD2000 in Lisp file content is encrypted (the author is research decryption program).
21. AutoCAD secondary development tools are many. Lisp has long been. R11 provides ADS (Acad Developsystem), R12 ADS provides real mode C compiler (such as BC.MS C) branch
Provide the ARX (Acad Runtime eXtend) held. R13, R14 provides VBAutomation, Automation so written in VB CAD program possible. Desire CAD programming, have one of the best choices. Having to learn ADS.ARX.ObjectThe ARX and AutoLisp, with added the AutoCAD programming world.
22.Must be user-defined Lisp file is automatically loaded into AutoCAD. Thus added need in acadr14.lsp in user Lisp files loaded statement acadr14.lsp (early version acad14.lsp), the Autoexec.bat like DOS must be good use such as the definition in which the named S :: STARTUP () function can automatically run it. (CAD Canadian enabled screen how additive available the STARTUP plus startapp function. login password).
23.AutoCAD graphics into WORD. Sometimes found round turned into a regular polygon. To use what VIEWRES command. Too large can change the graphics quality.
24.Form marked φ30H11 (+0.1, -0.2) marked it, please enter the text content the 0 {H11 (} {\ H0.7X; \ S +0.1 -0.2;}) can be achieved. dislike trouble. programmed to simplify operations.
25.In AutoCAD file as a block inserted into other documents but so too many blocks so that the file is too large. PURGE to clear them. Lump layer must use several Yeah!
26. AutoCADThe R14 help file content is very rich. Composed of a lot of the "book". Layers open to see more of them useful. Including all aspects of CAD. Than any CAD Daquan also full. Whether you think you join them. modify acad.cnt, joined their help links.
27.CAD according to the provisions scheduled ahp CAD Help file. R14 under ahp2hlp.exe be transformed into hpj file. Rtf file. Then HelpWorkshop tools (in VC5) open their projects Compile. hlp files.
28.Exe file under DOS in AutoCAD R14, still uses. Slide with Slidelib.exe for libraries. Mc.exe, compile menu.
29.After completing parts diagram for assembly. Parts Blocks can be inserted welding open reuse group after group assembled when what state the control group selected ddselect command and then cancel the group selection
30.Source files in AutoCAD menu. Mnu file to modify its own command can be added to the menu. Use menu command to load plus participate in AutoCAD to help understand the menu file format is relatively simple icon tool bar and add your own command point in the toolbar, right-point new toolbar dialogue.Button input tool bar a new tool bar then select the Customize button. Selected custom. Empty drag a button to the toolbar, then right-click on an empty button so you can define your own button icons and commands.
31.AutoCAD status line can also be defined at use the DIESEL language can access it. Easiest way to modemacro command. Enter $ (getvar, clayer) after the current layer name is displayed in the accurate line users can be described as all-pervasive. !
32.AutoCAD graphics format. Dwg, can also be exported as. Bmp and wmf or eps .. dxf .. 3ds render command can save pcx tga .. .. tif format. AutoCAD files also will direct deposit for these types of formats for the system you want to install a named "Rasterfile export printer. use it to print to a file. ACAD2000 files can also be saved as JPG format.
33.render coloring. render no close button user adoption: the (arxunload "render"), because it is a function of ARX file extension.
34. Dimzin system variables best be set to 8 when the default value is not in the dimension with several tail zero users to directly accept the default value is very convenient.
35. Encounter quick failure. ^ 0 lost into the orthogonal mode switching. Currently using the menu with menu. Mnu menu source files can reinstall it again.
36. Word97 edit the text in the multiline text (mtext) command Mtext multiline text editor AuotCADR14 new features it provides Windows word processing software with the command to open the "Tools" menu, select "Preferences" dialog box pops up. "Preferences" to open the "Files / TextEditor, Dictionary, and Font File Name / Text EditorApplicationIinternal ", double-click the" Internal "," Select ausers, such as re-use after the completion of the above settings file "dialog box." Winword.exe "then find the application file. strike" Open "button. finally click" OK "to return. mtext command system will automatically call the familiar Word97 The application icing on the cake for the text in the AotoCAD.
37.Using the tool buttons custom and many Lsp file can provide us with a very useful command in the AotoCAD. Chtext.lsp is a good text to modify the command. Especially suitable for a large number of text modifications, but must use this command before first Lsp file loaded. general, you can select the "Tools" menu "LoadApplication ... "option. Reuse dialog box opens AutoCAD R14/SupportUnder Chtext.lsp file. Then hit the "Load" button or directly type in the command line (load "chtext)" to achieve the purpose of loading. So do total somewhat cumbersome. Below we use custom tools button way to solve this problem. Right-click any tool button pop-up "Toolbars" dialog box. strike "Customize ..." button. empty onto the target position in the tool bar button will appear in "Categories:" select "Custom" items. hit the "Close" button to return. then right-click an empty button. appear "ButtonProperties "dialog box in the" Name: ", bar command button named." Help: "bar, you can write or not to write." Macro: "type" (Load"Chtext) cht", As for "ButtonIcon Icon ", user-selectable system also can point the" Edit ... "draw itself or directly call the existing bmp file. Last point" Apply "button and in turn close the dialog box and return to do your own work button



41.*



45.

47.





















a





















































































































































3.


4.






5.























2.

CAXA electronic drawing board is a very efficient and convenient. Intelligent universal Chinese design and drafting software help design parts diagram. Assembly drawings. Process chart graphic packaging design suitable for all occasions that require a two-dimensional drawing to make the design can concentrate on the design concept. completely get rid of the drawing board. meet modern business quickly design drawing information requirements of the electronic.

3.


4.



























)




















)





















































AutoCAD
The author during the AutoCAD design training and teaching and research for the use and management of the shortcut command accumulated some experience are summed up for everyone to use AutoCAD
I. Overview:


Naming rules. Shortcut command

Such as straight line (Line) shortcut command is "L"; the shortcut replication (COpy), command is "CO"; linetype scale (LTScale), the shortcut command "LTS".


3.

Three. Shortcut command definition
Round has already been mentioned. AutoCAD defined shortcut commands Save as ACAD.PGP file the. ACAD.PGP is a plain text file. Users can use a the ASC Ⅱ text editor (such as DOS EDIT) or use Notepad WINDOWS annex Originally edit users can add their own AutoThe CAD command shortcut to the file.

Shortcut command name. * Full name of the command
Such as: CO. * COPY

[References]






MA, * MATCHPROP (attributes match)

COL, * COLOR (set colors)




UN, * UNITS (graphics units)
ATT, * ATTDEF (attribute definitions)
ATE, * ATTEDIT (Edit Properties)
BO, * BOUNDARY (boundary created. Including the creation of a closed polyline and surface domain)
AL, * ALIGN (alignment)
EXIT, * QUIT (quit)

IMP, * IMPORT (input file)
OP, PR * OPTIONS (set custom CAD)


R, * REDRAW (regenerate)
REN, * RENAME (Rename)





V, * VIEW (named view)
AA, * AREA (area)



PO, * POINT (points)



ML, * MLINE (multi-line)

POL, * POLYGON (regular polygon)




EL, * ELLIPSE (oval)
REG, * REGION (surface field)
MT, * MTEXT (multi-line text)
T, * MTEXT (multi-line text)
B, * BLOCK (block definition)

W, * WBLOCK (defined block file)


3. Modify command:





M, * MOVE (mobile)
E, DEL key * ERASE (delete)

TR, * TRIM (trim)


LEN, * LENGTHEN (straight line stretched)
SC, * SCALE (scaling)
BR, * BREAK (interrupted)
CHA, * CHAMFER (chamfered)

AutoCAD 2000 shortcut command

PE, * PEDIT (polyline editing)
ED, * DDEDIT (modify text)






5 dimensions:
DLI, * DIMLINEAR (linear dimension)






TOL, * TOLERANCE (marked geometric tolerance)
LE, * QLEADER (quickly leads to marked)

DCO, * DIMCONTINUE (continuous label)
D, * DIMSTYLE (marked style)
DED, * DIMEDIT (edit annotations)
DOV, * DIMOVERRIDE (replace dimensioning system variables)
(B) commonly CTRL shortcuts
[CTRL] +1 * PROPERTIES (modify characteristics)

[CTRL] + O * OPEN (Open File)

[CTRL] + P * PRINT (print file)
[CTRL] + S * SAVE (save the file)


[CTRL] + C * COPYCLIP (copy)



[CTRL] + G * GRID (raster)

[CTRL] + W * (object tracking)
[CTRL] + U * (polar)

[F1] * HELP (Help)

[F3] * OSNAP (Object Snap)
[F7] * GRIP (grid)
[F8] * ORTHO (orthogonal)








































2




3
4